Effects
Floe has a selection of 10 effects that can be applied to the audio. These effects are applied to the mix of the three layers. The effects are shown in a list on the right-hand side of the main panel. You can change the ordering of the effects by dragging and dropping the effect names — either the name in the rack or the name next to the on/off switch.
Name | Description |
---|---|
Distortion | Distort the audio using various algorithms. |
Bit Crush | Apply a lo-fi effect to the signal by either reducing the sample rate or by reducing the sample resolution. Doing either distorts the signal. |
Compressor | Compress the signal to make the quiet sections louder. |
Filter | Adjust the volume frequency bands in the signal, or cut out frequency bands altogether. The filter type can be selected with the menu. |
Stereo Widen | Increase or decrease the stereo width of the signal. |
Chorus | An effect that changes the character of the signal by adding a modulated and pitch-varying duplicate signal. |
Reverb | Algorithmically simulate the reflections and reverberations of a real room. |
Delay | Simulate an echo effect, as if the sound is reflecting off of a distant surface. |
Convol Reverb | The Convolution reverb effect applies a reverb to the signal. The characteristic of the reverb is determined by the impulse response (IR). The IR can be selected from the menu. |
Phaser | Modulate the sound using a series of moving filters |